Cub Cadet 221 HP Illustrated Parts Manual

10
Labels (Model 221 HP)
777X45317
777S32236
777S34027
777S33118
777I22139
777D14849777S33731
777D14848
777I23463
3.)
1.) INSERT IGNITION KEY AND SNAP
IN PLACE.
2.)
MOVE CHOKE CONTROL TO THE
“CHOKE” POSITION. PUSH PRIMER
BUTTON 3x.
ROPE START: PULL SLOWLY UNTIL
HARDER TO PULL, THEN PULL RAPIDLY
TO START. REPEAT PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH
STARTER BUTTON. REPEAT PRIMING
IF NEEDED.
4.) MOVE CHOKE CONTROL SLOWLY TO THE
“RUN” POSITION.
5.) TO STOP ENGINE: PULL KEY OUT.
If engine does not start, consult
operators manual.
Do not run starter more than 10 times
at intervals of 5 Seconds On /
5 seconds Off.
Do not use electric start in the rain
STARTING
INSTRUCTIONS:
1. KEEP AWAY FROM ROTATING
AUGER
CONTACT WITH AUGER
CAN AMPUTATE HANDS AND FEET.
2. DISENGAGE CLUTCH LEVERS, STOP
ENGINE,
AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS
HAVE STOPPED BEFORE UNCLOGGING
OR SERVICING MACHINE.
3. TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT
BYSTANDERS USE EXTRA CAUTION
WHEN OPERATING ON GRAVEL
SURFACES.
4.
READ OPERATOR’S MANUAL.
PRIMER
STOP
KEY
PULL OUT KEY
TO STOP

Cub Cadet 221 HP Specifications

General

Brand	Cub Cadet
Model	221 HP
Category	Snow Blower
Language	English