Cub Cadet 260 Series User Manual

Assembly & Set-Up
3
9
Contents of Carton
• One String Trimmer • One Bottle of Oil • One Pack of Trimmer Line
• One String Trimmer Operator’s
Manual
• One Engine Operator’s Manual
Assembly
NOTE: This string trimmer is shipped without gasoline or oil
in the engine. Fill up the gasoline and oil as instructed in the
accompanying engine manual BEFORE operating your machine.
Upper Handle
1. Remove the wing knob and carriage bolt from the left
lower handle and the right lower handle. See Figure 3-1.
2. Pivot the upper handle into the operating position.
See Figure 3-1.
Figure 3-1
3. Move the upper handle into one of three positions by
pivoting it forward or rearward. Secure the upper handle to
the lower handle using the carriage bolts and wing knobs
removed in Step 1. See Figure 3-2.
Note: Make sure to use the corresponding hole on the left
side as on the right side of the upper handle.
Figure 3-2

Cub Cadet 260 Series Specifications

General

Brand	Cub Cadet
Model	260 Series
Category	Trimmer
Language	English