Service
7
18
Fuses
Unlatch and lift hood forward to get access to under the 1.
dash panel.
Remove fuse holder cover. See Fig. 7-2.2.
Remove the appropriate electrical fuse and replace with 3.
proper amperage fuse.
Lower and secure hood.4.
Headlight Bulbs
Raise hood to get access to the headlight assembly.1.
Turn the bulb/socket assembly approximately a quarter 2.
turn counterclockwise to align its tabs with the notches of
the reflector, then remove from the reflector. See Fig. 7-1.
Unplug the wire harness from the bulb/socket assembly.3.
Plug the new bulb/socket assembly into the wire harness.4.
Align the tabs of the new bulb/socket assembly with the 5.
notches of the reflector and insert the bulb. Turn the bulb/
socket assembly clockwise to lock in place.
Lower and secure hood.6.
Figure 7-1
Figure 7-2
To Next Page
Loading...
Need help?
General
