Important Information about your Culligan Water Softening System
Please fill in the information below for future reference� If you have any questions regarding your Culligan water system,
please contact the dealer that installed your system for assistance�
Addition information may also be found by visiting: www�culligan�com
System and Dealer Identification
System Name Model Name:
Control Valve Model # Control Valve Serial #
Date of Installation: Tank Serial #
Culligan Dealer: City/Town:
Dealer Phone # State:
System Settings
Time of Recharge AM/PM Recommended Culligan Service Interval:
Gallons Capacity Per Regeneration: Annual: ________ Bi-Annual: _________
Day Override / Interval: Owner Maintenance:
Salt Tank Capacity: _____ Check Salt Level
_____ Replace Cartridge Filter(s)
_____ Add Resin Cleaner
Water Analysis
Hardness ____________________ grains/gallon Total Dissolved Solids - TDS ______________________ mg/l
pH level (acidity) _____________________ S � U� Alkalinity _______________________________ grains/gallon
Chloride ____________________________ mg/l Manganese __________________________________ mg/l
Sodium _____________________________ mg/l Hydrogen Sulfide (HS) _________________________ mg/l
NOTE! mg/l (milligrams per liter) and ppm (parts per million) are equivalent units of measurement
1 grain = 17.1 mg/l
27
01040692 B 04/21
Records & Data
To Next Page
Loading...
