D-Link COVRAX COVR-X1860 User Manual

10D-Link COVR-X1860 || COVR-X1862 || COVR-X1863 || COVR-X1864 User Manual
Section 2 - Installation
Web Based Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up your Covr device and congure your Covr Wi-Fi network
using the web-based user interface.
Step 1
Position the Covr Point close to your Internet-connected modem and
connect an Ethernet cable to the modem and to INTERNET Port of the Covr
Point. Next, connect the power adapter and plug the Covr Point into a power
outlet.
Step 2
Wait for the Covr Point to boot up. When the COVR LED starts blinking
orange, wirelessly connect your computer to the Wi-Fi name (SSID) printed
on the bottom of the device, or on the included Quick Install Card.
Your Covr device is now set up and ready to use. You can now congure your Covr Wi-Fi settings using the free D-Link Wi-Fi
mobile app or the web-based user interface. Refer to the Conguration section on page page 11 for more information on
conguring your network using the web-based user interface.
http://covr.local./
Step 3
Type http://covr.local./ into a web browser and follow the on-screen
instructions to complete the setup.
MODEM
Wi-Fi
Wi-Fi
SSID:
Password:
WPS
QUICK INSTALL CARD

D-Link COVRAX COVR-X1860 Specifications

General

Brand	D-Link
Model	COVRAX COVR-X1860
Category	Network Router
Language	English