EasyManuals Logo
Home>D-Link>Security Camera>DCS-820L

D-Link DCS-820L Quick Installation Guide

D-Link DCS-820L
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
DCS-820L
7
English
The image is out of focus.
You can turn the white focus ring on the front of the camera to adjust the focus.
How do I change the accent rings?
Rotate the accent ring counterclockwise, then lift it o. Put the new accent ring
on, then rotate it clockwise until it clicks into place.
How do I select a dierent lullaby?
You can change the lullaby used in the mydlink Baby Camera Monitor app.
There’s a white haze on my camera video when I use night vision mode.
The night vision lights on the Wi-Fi Baby Camera may be reecting o a nearby
surface. Try repositioning and aiming the camera.
I started the mydlink Baby Camera Monitor app, but I can’t nd my camera.
Make sure your camera is turned on and receiving power.
If you have set up your camera before, make sure your smartphone or tablet is
connected to the same router as your camera.
If you are setting up a new camera or are using the camera away from home,
make sure your smartphone or tablet is connected to the cameras Wi-Fi
network.
The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a
4-digit code (the last 4 digits of your cameras MAC address).
The Wi-Fi password is printed on a label on the bottom of your camera.
You can also nd your cameras Wi-Fi network details on a label attached to the
back of this guide.
If you still can’t nd your camera, reset your camera by pressing its reset button
for 10 seconds while it is powered on.
Why is the camera view hazy or bright when using night vision mode?
The IR night vision lights on the camera may be reecting o of a nearby
surface or window. Try repositioning your camera to avoid reections or glare.
Can I change my cameras lullabies to my own music?
Yes! Visit the support page for your camera on the mydlink.com website for
instructions on how to use your own music les for your cameras lullabies.
Troubleshooting

Other manuals for D-Link DCS-820L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-820L and is the answer not in the manual?

D-Link DCS-820L Specifications

General IconGeneral
CertificationCE, CE LVD, FCC, C-Tick
Maximum range5 m
Motion sensorYes
Smartphone support-
Compatible productsiPhone, iPad
Number of lullabies5
Video compression formatsH.264
Mobile operating systems supportedAndroid 4.1, Android 4.2, Android 4.3, Android 4.4, iOS 6.0
Product colorWhite
Compatible memory cardsMicroSD (TransFlash)
Sensor typeCMOS
Fixed aperture2 mm
Video resolutions320 x 240, 640 x 480 pixels
Fixed focal length2.5 mm
Optical sensor size1/5 \
Minimum illumination0 lx
InterfaceWi-Fi
Wi-Fi standardsWi-Fi 4 (802.11n)
Depth86 mm
Width92 mm
Height120 mm
Power supply5.1 W
Dimensions (WxDxH)92 x 86 x 120 mm
Maximum number of cameras supported1
AC input voltage5 V
Power source typeDC, USB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C

Related product manuals