and press "ENTER" to start the "D-Link PCI Fast Ethernet Adapter Diagnostic
Program."
4. Read and follow the instructions on the screen. (Press the F1 key anytime for
additional help.)
5. "Adapter Basic Diagnostic" will determine if any problems exist with a DFE-
528TX.
6. "Network Diagnostic" will determine if any problems exist with your network
or connections. To use "Network Diagnostic" please run the diagnostic program
on both computers in MS-DOS mode. One computer must be designated the
"Master" and the other designated the "Slave".
To Next Page
Loading...
Need help?
General
