D-Link DFE-530TX User Manual

DFE-530TX 10/100Mbps Ethernet Adapter for PCI Bus
Installation 5
2
Installation
Installation of a DFE-530TX Ethernet Adapter requires
hardware installation first, then software installation.
Unpack and Inspect
CAUTION
:
Under ordinary circumstances, a DFE-530TX card
will not be affected by static charge as may be
received through your body during handling of the
unit. In special circumstances where you may carry
an extraordinarily high static charge, it is good
practice to reduce the charge by touching a ground
before handling the adapter card.
Open the shipping carton and carefully remove all items. In
addition to this User's Guide, ascertain that you have:
•
One DFE-530TX Ethernet Adapter Card.
•
DFE-530TX Software Diskette.
•
WOL Cable.

D-Link DFE-530TX Specifications

General

Interface	PCI
Standards	IEEE 802.3, IEEE 802.3u
Data Transfer Rate	10/100 Mbps
Connector	RJ-45
Device Type	Network adapter
Form Factor	Plug-in card
Data Link Protocol	Ethernet, Fast Ethernet
Cable Type	10Base-T, 100Base-TX
Full Duplex Support	Yes
LED Indicators	Link/Activity
Operating System Support	Windows, Linux
Ports	1 x RJ45