Need help?Do you have a question about the D-Link DGS-1008P and is the answer not in the manual?
General| MAC address table | 8000 entries |
|---|---|
| Store-and-forward | Yes |
| Packet buffer memory | 0.256 MB |
| Packet forwarding rate (1 Gbps) | 14880 pps |
| Packet forwarding rate (10 Mbps) | 1488000 pps |
| Packet forwarding rate (100 Mbps) | 148800 pps |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3ac, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
| Switch type | Unmanaged |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Product color | Black |
| Rack mounting | - |
| LED indicators | Activity, Link, PoE, Power, Speed, Status |
| Total Power over Ethernet (PoE) budget | 68 W |
| Power over Ethernet (PoE) ports quantity | 4 |
| Power over Ethernet (PoE) power per port | 30 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Input current | 1.5 A |
| Noise level | 0 dB |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 190 mm |
| Height | 38 mm |
To Next Page
