D-Link DIR-890L Quick Install Guide

4
Hardware Overview
1 SS USB LED A solid white light indicates a USB 3.0 device is connected.
2 USB LED A solid white light indicates a USB 2.0 device is connected.
3 5G LED
A solid white light indicates the 5GHz wireless function is working properly.
During the WPS process, this light will blink quickly.
4 2.4G LED
A solid white light indicates the 2.4GHz wireless function is working properly.
During the WPS process, this light will blink quickly.
5 Internet LED
A solid white light indicates a connection to the Internet port. If the LED is
orange, the connection is good but the router cannot connect to the Internet.
6 Power LED
A solid white light indicates a proper connection to the power supply. The light
will be solid orange during boot-up.
7 USB 3.0 Port
Connect a USB ash drive to share content throughout your network. Port
supports USB 3.0 and USB 2.0 devices.
8 USB 2.0 Port
Connect a USB ash drive to share content throughout your network. Port
supports USB 2.0 devices.
9 Reset Button
Press and hold the reset button with a paper clip for ten seconds to reset the
router to the factory default settings.
10 WPS Button Press to start the WPS process. The 2.4G or 5G LED will blink fast.
11
LAN Ports
(1-4)
Connect Ethernet devices such as computers, switches, and game consoles.
12 Internet Port Connect a broadband modem to this port using an Ethernet cable.
13 Power Button Press to power the router on and o.
14 Power Port Connect the supplied power adapter.
12
8
13
14
11
9
10
7
1 65432

D-Link DIR-890L Specifications

General

VPN support	PPTP/L2TP/IPsec
Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	3200 Mbit/s
WLAN data transfer rate (first band)	600 Mbit/s
WLAN data transfer rate (second band)	1300 Mbit/s
USB version	2.0/3.2 Gen 1 (3.1 Gen 1)
Input current	5 A
Rack mounting	No
Frequency band	2.4 & 5 GHz
USB ports quantity	2
WLAN data transfer rates supported	600, 1300 Mbit/s
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
DHCP client	-
Antennas quantity	6
Security algorithms	WPA, WPA2, WPS
Product type	Tabletop router
Product color	Red
Certification	IC\\r CE\\r Wi-Fi Certified\\r FCC
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	DC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Depth	387 mm
Width	247.3 mm
Height	119.5 mm
Weight	- g