D-Link DKVM-2K User Manual

5
Switching with the DKVM-2KU
The DKVM-2KU features a Select Button located on the front panel and keyboard Hot
Keys to switch quickly and easily between both your computers.
Select
Button
You can also use your keyboard to switch between your computers. Press the Scroll
Lock key twice to enter Hot Key switching mode. A beep confirms that the Hot Key
mode is activated.
Hot Key Menu
Scroll Lock + Scroll Lock + F1 : Switches console keyboard
,mouse ,monitor and USB device to PC 1 simultaneously. The PC1
LED will light solidly then.
Scroll Lock + Scroll Lock + F2 : Switches console keyboard
,mouse ,monitor and USB device to PC 2 simultaneously. The
PC2 LED will light solidly then.
Scroll Lock + Scroll Lock + 1 : Switches to PC 1 without USB
device’s signal. The PC1 LED will be blinking then.
Scroll Lock + Scroll Lock + 2 : Switches to PC 2 without USB
device’s signal. The PC2 LED will be blinking then.
Scroll Lock + Scroll Lock + S : Activates Auto Scan Mode.
Each computer will be scanned every 10 seconds.
Scroll Lock + Scroll Lock + ESC : Exits Auto Scan Mode and
Hot Key Mode.

D-Link DKVM-2K Specifications

Physical & Environmental

dimensions	104 x 62 x 28 mm
weight	420 grams
operating temperature	0 to 40 C
storage temperature	-20 to 60 C
operating humidity	0% to 80%
storage humidity	0% to 80%

Power

power voltage	5V 1A
power input	From PC's PS2 port, no power adapter required
power consumption	5V 70mA

KVM Cables

cable length	1.8 meter (6 feet)
keyboard connectors	mini DIN-6 PIN male
mouse connectors	mini DIN-6 PIN male
monitor connectors	HD 15 PIN male