4
Rear Panel
Network Cable Connector
The Print Server’s rear panel features an RJ-45 connector for connection to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should
be Category 5 twisted-pair cable). The port supports the NWay protocol, allowing
the Print Server to automatically detect or negotiate the transmission speed of the
network.
USB Port Connector
The rear panel of the print server features the USB port connector. Plug this
connector directly into the USB port on your network printer via a USB cable.
Parallel Port Connector
The rear panel of the print server features two parallel port connectors. Connect this
port to the parallel port on your network printer with a parallel cable.
DC Power Connector
The DC power input connector is located on the Print Server’s rear panel and is
labeled DC 5V.
Parallel Port
Connector
USB Port
Connector
Network Cable
Connector
DC Power
Connector
To Next Page
Loading...
Need help?
General
