D-Link DPR-1061 User Manual

12
PS Software
To avoid the conflict in your network, you can use PS Software to change the
related settings of your MFP Server (such as the IP address) after finishing the
installation of PS Software on your PC.
The PS Software contains two utilities: PS-Link and PS-Wizard.
Installing PS Software
1. Click the PSSoftwareSetup icon of the Installation CD-ROM, and then the
system will prompt a window for you to select a desired setup language from its
pull-down menu. After done the selection of language, click OK button to
continue.

D-Link DPR-1061 Specifications

General

Networking standards	IEEE 802.3
Network connection type	Ethernet LAN
Supported network protocols	TCP/IP, NetBEUI, IPP
Interface	10/100Base-TX
Dimensions (WxDxH)	192.5 x 118.4 x 31 mm
Power requirements	5.0V DC/2.5A
Compatible operating systems	Windows Vista/XP/2000/NT 4/ME/98SE/95 Apple Mac OS 9.x - MAC OS X 10.4.x Linux UNI X lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) NetWare 5.x
DC-in jack	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 50 °C
Certification	FCC, CE, C-Tick, IC, CSA

Weight and Dimensions

Depth	118.4 mm
Width	192.5 mm
Height	30.1 mm
Weight	292 g