D-Link DUB-E100 User Manual

2
Installation
Unpack and Inspect
Open the shipping carton and carefully remove all items. Ensure that the following items are included:
• One DUB-E100 USB 2.0 Fast Ethernet Adapter
• DUB-E100 Drivers and Manual on CD-ROM
• Quick Installation Guide
If any of these items are missing or damaged, please contact your local reseller for replacement.
Installing the Adapter
Plug the DUB-E100’s USB cable into an available USB port on your computer.
Windows will detect new hardware and prompt you for the drivers. The installation process varies slightly for
each operating system. Insert the DUB-E100 CD into your CD-ROM drive. Then proceed to the appropriate
installation section on the following pages for your operating system.
2

D-Link DUB-E100 Specifications

Power

bus power	2.5 W
current	0.5 A
voltage	5 V DC

Operating Environment

operating temperature	0 ˚ to 40 ˚C
storage temperature	-10 ˚ to 70 ˚C
operating humidity	5% to 95% (non-condensing)

Ports & interfaces

usb port	USB Type A
ethernet port	RJ-45 (10/100 Mbps Dual-Speed)
diagnostic LEDs	Speed, Tx/Rx Traffic

Weight and Dimensions

dimensions	73 x 21.3 x 20 mm
weight	22 g