D-Link DWA-130 User Manual

31D-Link DWA-130 User Manual
Section 4 - Wireless Security
Configure WPA/WPA2 Passphrase
Using the D-Link Wireless Connection Manager
It is recommended to enable WPA-PSK on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.
1. Open the Wireless Connection Manager by double-clicking on
the D-Link icon on your desktop.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect. If the network is using WPA-PSK, the
screen (as shown to the bottom-right) will appear.
3. Enter the WPA-PSK passphrase exactly as it is on your wireless
router or access point. Click the Show text in the password
field box to see the passphrase. Unchecking it will hide it.
4. Click OK to connect to the network. Allow up to 30 seconds to
connect.
If you would like to create a new network and enter the WPA-PSK
settings, refer to the next page.

D-Link DWA-130 Specifications

Operating Environment

operating temperature	32˚ to 104˚F (0˚ to 40˚C)
operating humidity	10 ~ 90% Non-condensing
frequency range	2.4GHz to 2.462GHz

Weight and Dimensions

item dimensions (WxDxH)	1.1” x 3.4” x 0.5”
packaging dimensions (WxDxH)	6.6” x 9.5” x 1.5”
item weight	0.1 lbs