D-Link DWA-130 User Manual

57D-Link DWA-130 User Manual
Appendix E - Warranty
“This Class B digital apparatus complies with Canadian ICES-003”
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC statement
Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
This device has been designed to operate with an antenna having a maximum gain of 2 dBi. Antenna having a higher
gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Règlement d’Industry Canada
Les conditions de fonctionnement sont sujettes à deux conditions:
(1) Ce périphérique ne doit pas causer d’interférence et.
(2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement
de ce périphérique.

D-Link DWA-130 Specifications

Operating Environment

operating temperature	32˚ to 104˚F (0˚ to 40˚C)
operating humidity	10 ~ 90% Non-condensing
frequency range	2.4GHz to 2.462GHz

Weight and Dimensions

item dimensions (WxDxH)	1.1” x 3.4” x 0.5”
packaging dimensions (WxDxH)	6.6” x 9.5” x 1.5”
item weight	0.1 lbs