D-Link MYDLINK DNR-322L Quick Installation Guide

DNR-322L
4
ENGLISH
SetupWizard
SETUP WIZARD - Mac
If you do not have a CD-ROM drive, or the CD is missing, visit http://www.mydlink.com/support to
download the Setup Wizard.
Step 1:
Insert the DNR-322L installation CD in the CD-ROM drive. After
you have inserted the CD into your computer, go to the CD drive
directory, and double-click the Mac Utility folder to enter.
Step 2:
Click on the Start button to start the wizard, and follow the
instructions from the Installation Wizard to nish setting up your
NVR.
GETTING STARTED WITH mydlink
After registering your DNR-322L NVR with a mydlink account during the NVR Installation Wizard,
you will be able to remotely access your NVR from the www.mydlink.com website. After you have
logged in to your mydlink account, you will see a screen similar to the following:
Step 1:
Open the web browser and go to http://www.mydlink.com, then login
to mydlink portal.
Step 2:
The mydlink portal will detect your device. Click Connect and your
browser will then take you to your NVR’s Live View.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)