Verify the status lights on the unit. The
Power, Phone 1, and Internet status
lights should be solid green. The Phone
2 light will be a solid green if you have
a second Vonage line. (The Internet
light will blink whenever there is data
activity.)
Install the Hardware
1
2
3
Connect the blue Ethernet cable into the
blue port labeled Internet on the back
of the telephone adapter. Connect the
other end to one of your router’s Ethernet
ports.
Connect the included power supply
to the Power port of the Telephone
Adapter.
Warning: Using a power supply with a
different voltage will cause damage to
the device and will void the warranty.
To Next Page
Loading...
Need help?
General