DAELIM LIBERTY User Manual

- 32 -
4-14 COMBUSTION CHAMBER
DECARBONIZING
■ Procedure
1. Unscrew the cylinder head nuts.
2. Remove the cylinder head.
(ILL. 35)
3. Remove the cylinder.
4. Disassemble the piston.
5. Decarbonize carbon deposit on
chamber inside with scraper and
wire brush.
6. Clean the piston top with No 600
sand paper.
Perform combustion chamber
decarbonizing within first 5,000km
travel.
4-14 DECARBONIZACIÓN DE LA
CAMARA DE
COMBUSTIBLE
■ Procedimiento
1. Sacar los tuercas del cabezal del
cilindro.
2. Remover el cabezal del cilindro.
(FIG. 35)
3. Remover el cilindro
4. Desmontar el pistón
5. Quitar los depósitos de carbón de
la cámara interior con una
escobilla de alambre y un
raspador.
6. Limpiar el pistón con lija No. 600
Realizar la decarbonización de la
cámara de combustión antes de los
primeros 5,000Km
(ILL. 35) CYLINDER HEAD
(FIG. 35) CABEZAL DEL
CILINDRO
LIBERTY 02.11.5 5:44 PM 페이지32

DAELIM LIBERTY Specifications

General

Engine Displacement	124.6 cc
Brakes (Front)	Disc
Brakes (Rear)	Drum
Fuel System	Fuel Injection
Engine Type	4-Stroke
Cooling	Air Cooled
Transmission	Automatic (CVT)
Max Torque	9.2 Nm @ 6, 500 rpm

Summary

Vehicle Specifications

Engine Specifications

Details of the motorcycle's engine specifications, including type, displacement, and carburetor.

Transmission Specifications

Specifications related to the motorcycle's transmission system, such as gear ratios and drive type.

Chassis Specifications

Information on chassis components, including suspension, brakes, tires, and dimensions.

Electrical System Specifications

Electrical system specifications, covering power source, charge control, and battery capacity.

Vehicle Operation

Fuel Cock and Filling Procedures

Operating the fuel cock and procedures for filling the fuel tank and checking engine oil.

Ignition and Starting Procedures

Using the ignition key for starting and locking, and the process of starting the engine.

Driving and Troubleshooting

Troubleshooting engine start issues, starting to ride, and driving on slopes.

Controls and Indicators

Using brakes, signals, horn, lights, and understanding speedometer/odometer.

Performance Checks

Daily Inspection Checklist

A checklist of daily inspections to ensure the motorcycle is in optimal condition for performance.

Regularly Scheduled Checks

Scheduled maintenance checks based on mileage or time intervals.

Maintenance and Lubrication

Engine and Gear Oil Management

Procedures for checking, filling, and draining engine and gear oil.

Ignition and Fuel System Maintenance

Maintenance of spark plugs, fuel cock, and carburetor for optimal engine operation.

Air Cleaner, Cables, and Brakes

Cleaning the air cleaner, adjusting throttle cable, and adjusting brakes.

Drivetrain and Electricals Maintenance

Maintenance of the drive chain, battery, and fuse replacement.

Engine Cleaning and Timing

Ignition timing, muffler cleaning, and combustion chamber decarbonizing.