3
EN
1. Use the speed control knobs to choose the desired ventilation level.
)RURVFLOODWLRQSXVKGRZQWKHRVFLOODWLRQSHQ3XOOWKHRVFLOODWLRQNQREXSDQGWKHIDQZLOOVWRS
oscillation.
1HYHULQVHUWȴQJHUVSHQFLOVRUDQ\RWKHUREMHFWWKURXJKWKHJULOOZKHQWKHIDQLVUXQQLQJ
4. Make sure the fan is placed on a level and stable surface to avoid falling over.
5. Disconnect the fan before moving it.
1. Unplug the appliance before you start cleaning and before maintenance.
2. Use a soft damp cloth for cleaning the housing, use some soapy water to remove stubborn dust. Do
not use petrol, thinners or other solvents.
3. Before you store the fan clean it thoroughly, cover with a vinyl bag and store it on a dry place.
)URQWJULOO
)DQEODGHORFNEXWWRQ
)DQEODGHV
4. Locknut for the back grill
5. Back grill
6. Axle
7. Motor front cover
8. Oscillation button
9. Clip
10. Speed control knobs
11. Knob for height adjustment
12. Base cover
13. Stand feet
1. Loosen and remove the four screws from the bars, cross the bars place the extension pipe on the
feet and fasten the screws again.
2. Loosen the screw on the housing by turning it to the left and place the housing on the extension
pipe and fasten the screw again.
3. Mount the back grill to the motor by matching the holes on the back grill to the round pins on the
motor housing. Put the grill over the pins.
4. Secure the back grill to the motor housing with the locknut for the back grill.
5. Put the blades onto the axle by matching the slots in the blade with the pin on the axle, tighten the
blades by turning on the fan blade lock button.
6. Test the blades by rotating with your hand. Make sure there is no friction, when there will be some
friction repeat the previous steps again.
7. Mount the front grill on the back grill with the clips and the supplied screw.
TECHNICAL DATA
Diameter : 16 inch / 40 cm
Max. power consumption : 45 W
MOUNTING
USE
MAINTENANCE
PARTS DECRIPTION
GUIDELINES FOR PROTECTION OF THE ENVIRONMENT
7KLVDSSOLDQFHVKRXOGQRWEHSXWLQWRWKHGRPHVWLFJDUEDJHDWWKHHQGRILWVGXUDELOLW\EXWPXVWEHRHUHGDWDFHQWUDO
point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and
packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of
used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities
for information regarding the point of recollection.
To Next Page
Loading...
Need help?
General
