29
Wall/Arm
Mounting
mode, as these would not allow all teletext lines
to be displayed. Therefore only the formats
ZOOM 14:9 AND ZOOM 16:9 (available with wide
screen TV models) cannot be preserved with
teletext subtitles. In this situation the default
format FULL SCREEN (equal to 16:9) will be used.
Attaching a Wall or Arm mounting device
This TV supports the VESA mounting standard
and will accommodate various VESA mounting
devices.
To install any VESA mounting device, please fol-
low the manufacturer’s instructions.
1. Remove all cables connected to the TV.
2. Lay the LCD TV face-down on a flat surface
with a blanket or other soft materials to pro-
tect the screen.
3. Remove the four screws attaching the stand.
Remove stand from LCD TV.
4. Remove the four screws attaching the rear
cover.
5. Now you are ready to install the VESA mount-
ing device suited to your applications (see
instructions below).
6. Connect all cables removed at step 1.
Installing VESA compliant mounting devices
1. Align the mounting interface pad (100mm x
100mm hole spacing) with the holes in the
televisions rear cover mounting pad.
2. Secure bracket with the four screws (4mmØ)
that came with the VESA mounting device.
GB
To Next Page
Loading...
Need help?
General
