16
COMMON INTERFACE
ANT
Antenna
Connection
Aerial connection with VCR/DVD
Connect your ① aerial cable to the RF (aerial) IN terminal on the VCR/DVD.
Connect the RF OUT terminal of the VCR/DVD to the Aerial terminal on the TV set with ② RF cable.
Note:
If you wish to use only the Aerial (RF) connection, then you should store the VCR/DVD channel on pro-
gramme number “
ZERO
” using the “Manual tuning” function (See page 25).
Now you can watch the VCR/DVD in TV mode by selecting the programme number “PR00”.
Otherwise use a scart connection from your VCR/DVD to this TV into AV1 or AV2 and select the appropriate
AV input on your TV to see VCR/DVD playback.
VCR/DVDRF IN
RF OUT
Aerial
terminal
DLT-20J1 / DLT-20J3 / DLT-20J9
DLT-19W4 / DLT-22W4
To Next Page
Loading...
Need help?
General
