Daewoo DLT-19W4T User Manual

22
16
PR 19 – – – – –
Mono
Full Screen
PR/PAGE
SELECT
OK
PR/PAGE
To Watch TV
- If the AV1 terminal on the TV set is connected with an external device, which is switched on, the TV will be ON at
AV1 mode. Otherwise, TV will be ON at the last mode.
1. Turning on the TV.
a) If stand-by indicator is red, then the TV set is in
stand-by mode. You can switch on using the
remote control “ POWER ” button (press and
hold 0,5 second), the NUMBER 0…9 buttons,
or PR UP / DOWN buttons. The local PR UP /
DOWN buttons can also be used. Once on, the
stand-by indicator turns to green and the pic-
ture appears on the screen.
b) If stand-by indicator is not lit, then the TV set
is powered off. You must press the TV set local
MAIN PO WER button. If a picture does not ap-
pear, then the stand-by indicator will be red.
In this case, use the remote control as indi-
cated in a).
c) If stand-by indicator is flashing red, and green
then the TV set is in child lock mode. It is nec-
essary to use the remote control POWER but-
ton, NUMBER 0…9 buttons, or PR UP / DOWN
buttons. The local PR UP / DOWN buttons will
not function. Once on, the stand-by indicator
turns to green and the picture appears on the
screen.
2. Adjust program.
• Select the desired program by pressing the
“ PR ” button or the number button.
3. Adjust volume.
• Sound reduces by pressing the “ VOL ” but-
ton.
• Sound increases by pressing the “ VOL ” but-
ton.
Note : Sound mutes by pressing the “ MUTE ” ( )
button.
4. Turning off the TV.
• Press the remote control “ POWER ” button and
hold 0,5 second, you can switch off to stand-by
mode (low power consumption mode) which
also allows quick restart by remote control (see
above: Turning on the TV).
• Pressing the TV set local MAIN POWER button,
you can power off the TV set. In this case, you

Daewoo DLT-19W4T Specifications

General

Brand	Daewoo
Model	DLT-19W4T
Category	LCD TV
Language	English