21
RECEIVING A CALL
¾ From handset
1. Pick up the handset and talk to the other party.
2. When finished, return the handset to the base.
¾ Switching to speakerphone
1. When using the handset, press key and return the handset to the base.
2. When finished, press key again.
¾ From speakerphone
1. When the telephone rings, press key and talk to the caller. For the other party to hear your
voice clearly, speak into the speaker from a distance of 32cm or less.
2. When finished, press
key again.
Note: Generally telecom transmits the incoming message between the first ring and the second
ring. So please answer calls after the second ring.
MAKING A CALL
¾ From handset
1. Pick up the handset.
2. When you hear the dial tone, dial the desired number.
3. The phone will start to time the conversation after 6 seconds.
4. When finished, return the handset to the base.
¾ From Speakerphone
1. Press key. When you hear the dialing tone, dial the desired number.
2. The phone will start to time the conversation after 6 seconds.
3. When finished, press
key again.
¾ Pre-dialing function
1. At on-hook state, dial the number using numerical key, if a mistake use DEL key to edit.
2. Press REDIAL key, the pre-dialed number will be auto-dialed out.
a) Redial function
1. Pick up the handset or press
key,
2. Press REDIAL key, the last dialed number will be dialed again.
b) Auto-redial function
1. Press key, dial a number, if you hear an engaged tone.
2. Press REDIAL key and the dialed number will be redialed automatically at every 6 seconds
until the line is through.
3. The phone will redial the same number automatically maximum for 15 times.
When there is an incoming call while using auto-redial, pick up the handset or press
key to
answer the call. The auto redial function will be terminated.
To Next Page
Loading...
Need help?
General
