4 Press 2 to select Add/Remove Channels.
5 Press DISPLAY to add the channel.
6 Press MENU three times to exit from the menus.
Setting the Cable Box (Cable Box Setup)
1 Press MENU to display the menu.
2 Press 3 to select Channel Set.
3 Press 4 to process Cable Box setup
4 Press the channel number (01~13) or input key
which matches to the output of the Cable Box to
connect between Cable Box and VCR.
5 Press CLEAR on the remote to correct setup status.
6 Press MENU when you are finished.
7 Press MENU to exit the menu system.
18
Daewoo Video Cassette Recorder User’s Guide
17
Daewoo Video Cassette Recorder User’s Guide
✔
When you make a timer
recording, the preset
channel number will be
displayed automatically.
Setting up your VCR,
continued
Setting up your VCR,
continued
3 Press 2 to select Add/Remove Channels.
4 Use 0-9 to enter the channel you want to remove.
5 Press CLEAR to erase the channel.
6 When you are finished removing channels, press
MENU three times to exit from the menus.
Adding channels to memory
If you have removed a channel from memory, you can
easily add it back again. To add channels:
1 Use 0-9 to tune to the channel you would like to add.
2 Press MENU to display the main menu.
3 Press 3 to select Channel Set.
To Next Page
Loading...
Need help?
General
