20
① Washing Heater isn't reworking after reach decision temperature.
② Normal Course + 40°C include 7 min that heater does not working.
③ If Set up Normal + 40°C then main washing time is 40 min.
④ If LS value is more than 360, 1 hour add in Washing Time.
3) Electric Current Time of Washing Motor
① It works decision cycle
② If Motor Restriction occur by overload, Motor try to rework opposite direction.
③ While Water Supply, Motor Stir proceed ON first.
④ Crease Care is process of removal laundry that stick to drum. It works after Spin Sequence.
⑤ Electric Current Time of Washing Motor ON/OFF Time is finishing washing of Steam White and
Baby Courese.
⑥ Each Time of Electric Current Time of Washing Motor of Steam White and Baby Course is 10/5,
18/6.
4) Re-Water Supply
① It works if water level is lower than decision level
① Motor stopped while Re-Water Supply
① While Wash Sequence Re-Water Supply works 15 times.
① If Water Level is lower than RESET Level, Display IE and Heater off.
Part
Course
Water
Temperature
MOTOR TIME On/OFFF(sec)
Speed
Water
Supply
Washing
Soak
Crease
Care
Heating Main Washing
Cotton/Normal 5/10 10/10 18/6 15/180 10/5 45 r.p.m
Synthetic 5/10 10/10 18/6 15/180 10/5 45 r.p.m
Delicate/Hand Wash X X 3/30 15/180 X 45 r.p.m
Intensive 5/10 10/10 10/5 15/180 10/50 45 r.p.m
Quick20 5/10 X 10/5 15/180 10/50 45 r.p.m
Sports Wear 5/10 10/10 15/6 15/180 10/50 45 r.p.m
Tun Clean 5/10 X 10/30 15/180 10/50 45 r.p.m
Drain - - - - - -
To Next Page
Loading...
Need help?
General