L
Leslie JohnsonAug 3, 2025
What to do if Daewoo DWD-1211RT Washer starts water supply when power is off?
- DDavid BrownAug 3, 2025
If the water supply starts when the power is off, the inlet valve may be broken. In this case, change the Inlet-Valve.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if Daewoo DWD-1211RT Washer starts water supply when power is off?
If the water supply starts when the power is off, the inlet valve may be broken. In this case, change the Inlet-Valve.
Why is there no water supply with a 'wing' sound in my Daewoo DWD-1211RT?
If you hear a "wing" sound and there's no water supply, it could be due to several reasons: * The water tap might be closed. Open the water tap. * There might be alien material jammed in the filter. Clean the filter. * There might be alien material inside the inlet valve. Change the Inlet- Valve. * Coil short.
What to do if Daewoo Washer starts water supply when power is on?
If the water supply starts when the power is on, it could be due to: * A broken pressure switch. Change the Sensor Pressure. * A broken pressure hose. Change the bad parts.
General| Washing Capacity | 12 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Capacity | 12 kg |
| Number of Programs | 15 |
| Type | Front Load |
| Energy Rating | A |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
Provides an exploded diagram and part list for the inlet box assembly.
Tabular representation of program steps, time, and conditions for various cycles.
Describes how the PCB determines water level based on load.
Details the process and properties of the balance spin function.
Describes a mode to test PCB and electronic parts without water.
Details a mode for continuous testing of all components and LEDs.
Describes the components and structure of the BLDC motor.
