10
WASHING PROCEDURE AND PROGRAM SELECTION
Washing Procedure
• Turn the program selector to the desired program
The indicator light of Start/Hold button is on.
• If required, press the button(s) for option(s).
The indicator light of the selected option button is on.
• Press the Start/Hold button.
The selected program starts and the indicator light of
Start/Hold button twinkle.
Rinse : Rinse cycle with subsequent spin cycle for rinsing hand-washed items.
Spin : Spin cycle after a program with setting “Rinse hold” is finished or for spinning hand-washed washing.
Washing and rinsing water is drained before the spin cycle
Drain : Water is drained after program with setting “Rinse hold” is finished.
Intensive wash : The washing time is extended so that highly soiled laundry is washed more intensively.
Rinse+ : Additional rinsing of laundry. Program duration and rinsing water is extended accordingly. This help to
remove residuary traces of detergent and recommended in area with very soft water.
Rinse Hold : For delicate textiles and net curtains. All program can be carried out without the final spin cycle.
The laundry is left in the final rinsing water. Before the laundry is unloaded, the “Drain” or “Spin”
must be run by using program selector.
To Next Page
Loading...
Need help?
General
