38
• Water drips from nozzle when steam
cycle starts.
• Steam doesn’t generate but no error
code is shown
• Garments still wrinkled after Steam
Spray
• The drum does not turn during Steam
cycle
• Odors remain in clothing after Steam
Spray
• Top plate of the dryer is very warm
Question
This is the condensation of water. Dripping water will be stopped in
the short time.
Check if the cord of dryer is connected. If the steam doesn’t generate
when the cord connection has no problem, call the service center.
Check if the clothing quantity is so large and if the clothing is proper to
the steam.
The drum is stopped for the stay of the water vapor during steam
cycle.
The odor of clothing remains in spite of the use of Steam Spray be
sure to use the Steam Spray after normal cycled cleaning.
The top plate of the dryer will get warm during steam functions.
What to Do
12. Problem: If the steam has something wrong
To Next Page
Loading...
Need help?
General
