NOTE: DRY LEVEL selections can only be made
while using Sensor Dry Cycles.
Selecting MORE Dry or LESS Dry
automatically adjusts the needed time
which is already sensed.
NOTE: DRY LEVEL selections can only be made
while using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically
adjusts the sensed time needed.
11
Before use
• Clean lint screen before or after each cycle.
• Place laundry into dryer and shut door. See
Loading.
• Turn the knob to select the drying cycle you want.
The preset setting for Sensor Dry Cycles or Manual
Cycles will glow. The estimated or actual cycle time
(in minutes) will show in the display.
22
Loading
• Determine load size by the amount of space the
load requires rather than the weight of the load.
• Avoid overloading the dryer.
Following these instructions can help reduce
your utility bill, prolong the life of your clothes,
and decrease the likelihood of uneven drying
and wrinkle.
33
To use a sensor dry cycle
• Select DRY LEVEL to adjust how dry you want
the load. As the cycle runs, the control senses
the dryness of the load and adjusts the time
automatically for the selected dryness level.
• Select the desired options.
• Press START/PAUSE
Starting your dryer
• Use these buttons to set
dry level
• First, select sensor dry
cycle.
• Select dry level to adjust how much you want to
dry the load.As the cycle runs, the control senses
the dryness of the load and adjusts the time
automatically based on the selected dryness
level.
Dry Level
12
NOTE: DRY LEVEL selections can only be made
while using Sensor Dry Cycles.
Selecting MORE Dry or LESS Dry
automatically adjusts the needed time
which is already sensed.
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during
the cycle.
• Dry item completely. Foam rubber pillows are slow
to dry.
To Next Page
Loading...
Need help?
General
