1
Connect the main lead to an electrical outlet.
2
After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must
always be in place during cooking.
3
Close the door securely.
4
Choose cooking power by setting V.P.C. Knob to the desired position.
Refer to cookbook for recommended power levels.
5
Determine cooking time. Consult cookbook for recipe timing.
¢” Oven light turns on and cooling fan starts to operate. Microwave cooking starts.
6
You may open the door while the oven is operating.
As soon as the door is opened, the safety mecha-
nisms stop microwave power and cooking timer.
if you wish to change the time during cooking, simply
adjust the Timer to the desired time.
7
When the timer reaches zero, a bell will ring and the
unit will turns off.
¢” Oven light turns off.
If additional cooking time is needed and the door has
not been opened, the oven will automatically start
when the Timer is reset.
7
OPERATION
Variable Power Cooking
ON and OFF cycle time of mechanicial V.P.C. switch is 30 seconds.
When the V.P.C. knob is set to the desired position and timer knob turns to the desired position, the V.P.C. switch
has a cycle (ON/OFF time (sec)) listed below.
NOTE :
1. When setting Timer for less than 2 minutes, turn
the Timer past 2 minutes and then return to the
correct timer setting.
2. Various clicking noises may be heard when turning
the V.P.C. knob. This is normal and does not affect
the operation of your microwave oven.
Variable power setting
(HIGH)
(MED HIGH)
(MEDIUM)
(DEFROST)
(WARM)
ON/OFF time (sec)
30/0
23.2/6.8
16.5/13.5
9.8/20.2
5/25
Power
100%
77%
55%
33%
17%
To Next Page
Need help?
General
