24
CARE AND CLEANING
• Clean the water collecting tray with a sponge or
absorbent cloth.
2. Ice Storage Bin
• Removing: Pull out and remove the ice cube bin
• Cleaning: Empty the ice cube bin and clean with
lukewarm water.
Thoroughly dry the bin and screw conveyor to prevent
new ice cubes from sticking.
• Replacing: Push the ice cube bin all the way back onto
the supports until it locks into position.
If the bin cannot be pushed all the way back, rotate the
ice auger a quarter turn and insert again.
• Hold both ends and pull up.
4. Refrigerator Shelves
To remove a shelf: Lift up
on front of shelf with one
hand and with other hand
push up on back of shelf to
release attachment hooks
from attachment slots. Pull
the shelf out.
To reinstall a shelf: With
front of shelf angled slightly
up, engage hooks on back
of shelf into attachment
slots, and then lower front
of shelf into place.
CAUTION
: Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf falling
or spilling food.
To Next Page
Loading...
Need help?
General
