Care and Maintenance of your Vacuum Cleaner
WARNING! Always disconnect the cleaner from the mains power supply
before cleaning.
• Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or
abrasive cleaners.
• Do not submerge the cleaner in water or any other liquids.
• Empty the Dust Compartment (10) as soon as the ‘MAX’ line is reached.*
• Wash the Hepa, Sponge and Cyclonic Filters regularly – see table below.
• Allow all the filters to thoroughly dry out for 24 hours before reassembly and
use.
WARNING!* DO NOT continue to use your vacuum cleaner once the ‘MAX’
mark has been reached as permanent damage may occur to the appliance.
Recommended Filter Cleaning Intervals