Dahua DH-IPC-HFW2100P User Manual

9
2 Structure
2.1 Rear Panel
You can refer to the following figure for rear panel information. See Figure 2-1.
Figure 2-1 Rear panel
Please refer to the following sheet for detailed information.
SN
Port Name
Function
Connection
Note
1
VIDEO OUT
Video output
port
BNC
Output analog video signal. Can connect to TV
monitor to view video.
2
Indication
Light
Red light
 System boot up-red light is on
 System upgrades-red light flashes.
 System resets-red light is on.
3
DC 12V
Power port
 Power port.
 Input DC 12V.
4
A
RS485 port
RS485_A port, control external PTZ
B
RS485_B port, control external PTZ
G
GND
RS485 ground port.
IR
IR light port
Connect to peripheral IR light control port.
5
LAN
Network port
Ethernet
port
 Connect to standard Ethernet cable.
 Support PoE function.
6
RESET
Reset button
Restore factory default setup.
When system is running normally, press the
RESET button for at least 5 seconds, system
can restore factory default setup.
7
GND port
Please make sure the device is securely
earthed to prevent the thunderstorm strike.
bezpeka-shop.com

Dahua DH-IPC-HFW2100P Specifications

General

Brand	Dahua
Model	DH-IPC-HFW2100P
Category	Security Camera
Language	English