Dahua IPC-HFW2231S-S-S2 User Manual

Network Configuration 2
2 Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For
more information, see the WEB Operation Manual.
 Device initialization is available on select models, and it is required at first use and after
device is being reset.
 Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stays in the same network segment.
 Planning useable network segment properly to connect the device to the network.
 The following figures and interfaces are for reference only, and the actual product shall
prevail.
2.1 Initializing Device
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The Modify IP interface is displayed. See Figure 2-1.
Modify IP interface Figure 2-1
Click Search setting. Step 3
The Setting interface is displayed.
Enter the start IP and end IP of the network segment in which you want to search Step 4
devices, and then click OK.

Dahua IPC-HFW2231S-S-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2231S-S-S2
Category	Security Camera
Language	English