Dahua IPC-HFW2431T-ZS-S2 Quick Start Guide

Introduction 1
1 Introduction
1.1 Cable
 Cable type might vary with different devices, and the actual product shall prevail.
 Please waterproof all the cable joints with insulating tape and waterproof tape to avoid
short circuit and water damage. For the detailed operation, see the FAQ manual.
Cable list Figure 1-1
For more information about cable ports, see Table 1-1.
Table 1-1 Cable Information
SN
Port name
Function description
1
DC 12V power
input
Inputs DC 12V.
2
Alarm I/O
Includes alarm signal input and output ports, the number
of I/O ports might vary on different devices. For detailed
information, see Table 1-2.
3
Ethernet port
Connects to network with network cable.

Provides power to the device with PoE.

PoE is available on select model.
4
Audio input
Connects to sound-pick-up device to receive audio signal.
5
Audio output
Connects to speaker to output audio signal.
For more information about I/O port, see Table 1-2.
Table 1-2 Alarm Information
Port
Port Name
Function
Alarm I/O
ALARM_OUT
Outputs alarm signal to alarm device.
ALARM_IN
Receives the switch signal of external alarm source.

Dahua IPC-HFW2431T-ZS-S2 Specifications

General

Brand	Dahua
Model	IPC-HFW2431T-ZS-S2
Category	Security Camera
Language	English