Daikin MC30VVM-A User Manual

12
11
PREPARATION BEFORE OPERATION / OPERATING/INDICATOR PANEL
How to Use
Indicators Buttons
OPERATING/INDICATOR PANEL
4
MODE lamps [green]
5
FAN lamp [green]
6
Dust/PM2.5 sensor lamp
3
ON/OFF lamp [green]
1
ON/OFF Button
2
FAN/MODE Button
1
ON/OFF button
Press to turn the power ON or OFF.
3
ON/OFF lamp [green]
Lamp will light up when the power
is ON.
5
FAN lamp [green]
Indicates the active FAN setting
(4 settings: Quiet, Low, Standard,Turbo).
▶
About the FAN symbols
2
FAN/MODE button
Press to cycle between FAN
settings and MODEs.
4
MODE lamps [green]
Indicates the MODE in operation.
6
Dust/PM2.5 sensor lamp
Indicates the volume of ambient dust in 3 colours:
green, orange, red.
∗
Green indicates that the air is clean.
∗
The dust/PM2.5 sensor lamp can detect small (approx.1.0-
2.5μm) and large (approx. 2.5μm and above) dust particles.
The “PM2.5” lamp lights in response to small particles and the
DUST lamp lights in response to large dust particles.
Symbol
Setting Quiet
* * *
Low Standard Turbo
FAN
Green Orange Red
Few Many
Lamp colour
Dust
About the dust/PM2.5 sensor lamp
- After operation is started, the lamp will light green for the rst minute (approx.) regardless of air impurity level.
- If the responsiveness of the dust/PM2.5 sensor is poor, change the sensitivity setting of the sensor. ►Page14
- The responsiveness of the dust/PM2.5 sensor may be poor during FAN setting “Turbo” or when airow is high in
AUTO FAN MODE. The strong airow causes dust to be drawn into the air inlets before it can be detected by the
dust/PM2.5 sensor. This is normal (not a malfunction).
Dust/PM2.5 sensor detection range
- Detectable matter : house dust, tobacco smoke, pollen, mites, pet hairs,diesel particulate matter
- Sometimes detectable : steam, oil smoke
TIPS
∗
The size of the symbols varies in accordance with
the airow rate setting.

Daikin MC30VVM-A Specifications

General

Brand	Daikin
Model	MC30VVM-A
Category	Air Cleaner
Language	English