unplug the unit. (An electric shock or injury may result)
Indicator lamp Cause/Solution
MODE lamp is blinking.
This lamp blinks if the deodorising fi lter unit has been detached or
is not attached properly.
Attach the deodorising fi lter unit properly.
►
Page 14
Streamer lamp is blinking.
It is time to replace the Streamer unit.
Contact the place to purchase.
ON-OFF Lamp Blinking.
An electrical component is faulty.
Contact the place of purchase.
All 3 FAN lamps are
blinking simultaneously.
Are the pre-fi lters
and dust collection
fi lter attached?
These lamps may
blink if the unit is
operated without a
part attached
If all parts are attached
An electrical component is faulty.
Contact the place of purchase.
If one or more components are not
attached
Remove the power supply plug, reattach
the parts and then turn the unit on again.
Is there a buildup
of dust on the
pre-fi lter?
If there is no dust buildup
An electrical component is faulty.
Contact the place of purchase.
If there is a dust buildup
Remove the power supply plug, clean
the pre-fi lter and then turn the unit on
again.
►
Page 13
Is the air outlet
blocked?
If the air outlet is not blocked
An electrical component is faulty.
Contact the place of purchase.
If the air outlet is blocked
Remove any obstacles blocking the air
outlet and then turn the unit on again.
These lamps may blink if there is a sudden drop in voltage.
If none of the conditions above occurs,
Contact the place of purchase. It is recommended to unplug
the unit until the service agent is arrive.
To Next Page
Loading...
Need help?
General
