EasyManuals Logo
Home>Danfoss>Temperature Controller>102E5

Danfoss 102E5 User Manual

Danfoss 102E5
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Factory preset programmes
Factory Presets
The unit is supplied with the following preset programme
which will be active after the unit has been reset.
Mon-Fri or All
days in 24hr mode
Sat-Sun*
(5/2day mode only*)
1st ON 6.30am 7.30am
1st OFF 8.30am 10.00am
2nd ON 12.00pm 12.00pm
2nd OFF 12.00pm 12.00pm
3rd ON 5.00pm 5.00pm
3rd OFF 10.30pm 10.30pm
NB. 2nd ON and 2nd OFF are set to the same time.
These 2 times are ignored by the programme therefore
the heating will just come on once in the morning and
once in the evening. If you want the heating to come on
in the middle of the day set the 2nd ON and 2nd OFF to
the times you require.
Accepting the preset times
If you are happy to use the settings above, you don’t
need to do anything else.
To accept the presets press the PROGRAMME button
until the colon in the display begins to ash.
Your unit is now in RUN mode.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss 102E5 and is the answer not in the manual?

Danfoss 102E5 Specifications

General IconGeneral
BrandDanfoss
Model102E5
CategoryTemperature Controller
LanguageEnglish

Related product manuals