Danfoss 102E7 User Manual

21
Temporary User Overrides
Sometimes you may need to need change the way you use your
heating temporarily, i.e due to unusually cold weather. The 102E7
has two convenient overrides which can be selected without
a ecting the set programme.
+1HOUR
Press +1HOUR once if you need an extra hour of
operation (a red light will come on)
If the system is o it will come on for an hour. If it is already
on it will add an extra hour so the system stays on for an
extra hour.
To cancel the override press +1HOUR again (red light will
go o ). Otherwise the override will self-cancel at the next
programmed event.
MAN
Press MAN button once to manually override the
programme (only whilst unit is set to AUTO or ALLDAY) (a
red light will come on)
If the system is on it will go o . If it is o it will come on. The
set programme will resume at the next programmed ON/
OFF time.
To cancel the override press MAN again (red light will go
o ).
Override
buttons
Override buttons

Danfoss 102E7 Specifications

General

Brand	Danfoss
Model	102E7
Category	Thermostat
Language	English