15
Changing the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
● 7 day - different settings for each day of the week
(page 16-17) - default setting
● 5/2 day - one set of programmes for weekdays and
another for weekends (page 18-19)
Please follow the correct instructions to programme
your unit.
Please Note
The unit must be programmed in sequence and ON/
OFF times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press
NEXT ON/OFF to move on to the next setting
Your clock will allow you to programme 3 ON/OFF
settings per day. If you do not wish to use one of the
ON/OFF settings, simply programme the ON time to
be the same as the OFF time and the setting will not
operate.
If at any time you get confused and need to reset your
timings to the standard preset programme, press the
R/S button to return to the preset programmes.
!
!
Changing the preset programmes
To Next Page
Loading...
Need help?
General
