Danfoss FP715 User Manual

7
This conversion ...” to determine whether Table A (pages 6-9) or Table B
(pages 10-13) should be used. If in any doubt, contact our Technical Services
Department before proceeding with the replacement. *Any wires connected
to switch COMMONS which are linked LIVE on existing wallplates must be
transferred to the LIVE terminal on the new wallplate.
HTG
ON
Wires other
than links
in these
terms got
to LIVE
NOTE
This conversion applies
only if....
An additional terminal
block may be required
where these discon-
nected leads (or pairs)
should be terminated
4LL ABCD
625
Programmed
selectors UNLINKED
21-
425
7-- 8
7 5 8 Terminals 5,8 & 10 are LINKED
6 5 7 Terminals 5 & 7 are LINKED
425
Programme
selectors UNLINKED
425
Programme
selectors UNLINKED
385
4--
53- SS
4-5
Programme
selectors UNLINKED
ABCD
4--
2--
165
83-
5--

Danfoss FP715 Specifications

General

Brand	Danfoss
Model	FP715
Category	Temperature Controller
Language	English