Danfoss FP715Si Installation Guide

Danfoss Heating
11
GB
W
HTG
ON
Wires other
than links in
these terms
go to LIVE
NOTE
This conversion applies
only if....
An additional terminal
block may be required
where these discon-
nected leads (or pairs)
should be terminated
4LL ABCD
625
Programmed
selectors UNLINKED
21-
425
7-- 8
758
Terminals 5,8 & 10
are LINKED
6 5 7 Terminals 5 & 7 are LINKED
425
Programme
selectors UNLINKED
425
Programme
selectors UNLINKED
385
4--
53- SS
4-5
Programme
selectors UNLINKED
ABCD
4--
2--
165
83-
5--
be used. If in any doubt, contact our Technical Services Department
before proceeding with the replacement.
*Any wires connected to switch COMMONS which are linked LIVE on
existing wallplates must be transferred to the LIVE terminal on the
new wallplate.

Danfoss FP715Si Specifications

General

Brand	Danfoss
Model	FP715Si
Category	Thermostat
Language	English