Danfoss MCA 121 User Manual

3 How to Install
3.1.1 The EtherNet/IP Option
Ethernet Port 1
MS LED
NS LEDs
MCA 121
EtherNet/IP
MS
NS2
NS1
Ethernet Port 1 Ethernet Port 2
MAC: 00:1B:08:XX:XX:XX
Option A
130B1119
MAC
address
Ethernet Port 2
SW. ver. 1.00
130BA895.11
Illustration 3.1 Overview of the option
3.1.2
How to Install Option in Frequency
Converter
Items required for installing a fieldbus option in the
frequency converter:
- The fieldbus option
- Fieldbus option adaptor frame for the frequency
converter. This frame is deeper than the standard
frame, to allow space for the fieldbus option
beneath
- Strain relief (only for A1 and A2 enclosures)
EtherNet Port1
EtherNet Port2
MCA 121 Option A
EtherNet/IP 130B1119
MS
MS1 MAC-00-1B-08-00-00-22
MS2
SW.ver.
130BT797.10
Instructions:
- Remove LCP panel from the frequency converter.
- Remove the frame located beneath and discard it.
- Push the option into place. The Ethernet
connectors must be facing upwards.
- Remove both knock-outs on the fieldbus option
adaptor frame.
How to Install MCA 121 EtherNet/IP
6 MG.90.J3.02 - VLT
®
is a registered Danfoss trademark
3
3

Danfoss MCA 121 Specifications

General

Brand	Danfoss
Model	MCA 121
Category	Media Converter
Language	English