Danfoss MCD 202 User Manual

MCD Soft Starter Remote Operator
MG.17.E2.02 – VLT is a registered Danfoss trademark 7
Operation
 When used in conjunction with MCD 3000 starters
with serial numbers between xxxx06-482 and
xxxx07-xxx, Trip Codes C (Communications Failure), L
(FLC Out of Range) and Y (Incorrect Main Control
Module) are displayed as 1– on the Remote Operator.
These trip codes are displayed correctly on the soft
starter front panel.

Danfoss MCD 202 Specifications

General

Rated control supply voltage Us	24 V AC/DC
IP Rating	IP20
Frequency range	50/60 Hz
Relative humidity	5 - 95% (non-condensing)
Approvals	CE
Output current range	2.5-5A
Operating temperature range	-10°C to +55°C
Storage temperature range	+70°C