Danfoss RET2000B-RF + RX1-S User Manual

RET2000
8
GB
RU
NL
FR
ES
DK
DE
TR
GB
Thermostat status (heat mode only)
A  ame symbol will be lit whenever the thermostat is calling for
heat.
Setting the temperature
Press either the Λ or V buttons, the product backlight will come
on.
Press either the Λ or V button again within 6 seconds, the display
will  ash with the current set temperature. While the display is
 ashing press the Λ arrow to increase the set temperature to the
required setting or the V arrow to decrease the set temperature.
If no buttons are pressed the display will return to actual
temperature after 4 seconds and the backlight will go out after
6 seconds.

Danfoss RET2000B-RF + RX1-S Specifications

General

Brand	Danfoss
Model	RET2000B-RF + RX1-S
Category	Thermostat
Language	English