Danfoss TMM 089 User Manual

Reassembly
1. Lubricate and install new O-rings (G090A).
2. Install HPRVs. Torque to the value 80 N•m [59 lbf•ft].
3. Check for leaks.
HPRVs
G090A
G090
G090A
G090
I12 mm
80 N•m [59 lbf•ft]
d
d
Loop Flushing Relief Valve
Replace the loop flushing relief valve (K00**) as a complete unit. Do not attempt to repair the internal
components of the valve. Torque to 38 N•m [28 lbf•ft].
Removal
Using an 17 mm wrench, remove the loop flushing relief valve. Discard seal O-ring on the plug (K030).
Inspection
Inspect the poppet (K010) and the sealing surfaces of the motor for nicks or scratches.
Reassembly
1. Lubricate and install new seal O-ring.
2. Install the loop flushing relief valve, and torque to 38 N•m (28 lbf•ft).
3. Operate vehicle/machine through full range of controls to ensure proper operation.
Service Manual
TMM Transit Mixer Axial Piston Motor, Size 070/084/089
Minor Repair
L1211037 • Rev AC • Apr 2014 25

Danfoss TMM 089 Specifications

General

Brand	Danfoss
Model	TMM 089
Category	Engine
Language	English