To Next Page

To Previous Page

TP4000

1.0 Basics

1.1 Your programmable room thermostat

The TP4000 allows you to programme up to 6 times and temperatures

at which your heating will come on and go oﬀ each day.

It features several user overrides including frost protection,

thermostat mode and time or temperature display.

1.2 Preset Programmes

Your TP4000 comes ready programmed with a set of operating times

and temperatures which often suit most people.

If you want to change any of these settings you can do so by following

the instructions on page 8.

First, follow the steps on page 7 to set the correct time and date.

Event Time Temp °C

1 06:30 20

2 08:30 15

3 11:30 20

4 13:30 15

5 16:30 21

6 22:30 15

RESET

Open the ﬂ ap on the front of the programmer

and press the RESET button with a non-

metallic object until the display goes blank.

This will ensure that the factory programmes

are set and that the micro-computer in the

product is operating correctly.

1.3 Before you start

Danfoss TP4000 Range User Manual

Other manuals for Danfoss TP4000 Range