Danfoss TP5000-RF User Manual

12
Running your programme
20
i2 24
Press PROG – the colon in the LCD display
will start to  ash. The heating will now come
on and go o at the programmed times.
User Overrides
 Press + and – together to change
between settings.
 Press  or  until required temperature is
displayed.
This override will automatically cancel at beginning of
next programmed event)
 Press  and  together once.
This override cancels at 2:00am.
Sometimes you may need to change the way you use your heating
temporarily, i.e.due to unusually cold weather. The TP5000 has
several user overrides, which can be selected without a ecting the
thermostat programming.
Altering display to show either time or actual room
temperature
To temporarily use your weekend programme during
the week
(i.e. you have a days holiday or are o sick)
To temporarily alter the current programmed
temperature
User Instructions
GB

Danfoss TP5000-RF Specifications

General

Brand	Danfoss
Model	TP5000-RF
Category	Thermostat
Language	English