3
Installation
Instructions
GB
Important note RF products: Ensure that there are no large metal objects, such
as boiler cases or other large appliances, in line of sight between the transmitter
and receiver as these will prevent communication between thermostat and receiver.
Specifi cation
GB - Installation Instructions
Thermostat Features TP7000-RF TP7000 TP7000M
Power supply
2 x AA/MN1500/LR6 alkaline
batteries
230v, 50 Hz
Memory backup
Capacitor during battery change
for 1 minute
Rechargable
cell, 24 hrs (*1)
Switching action of output relay N/A 1 x SPDT, Type 1B
Switch rating of relay contact,
voltage and current
N/A 3(1) A, 230 volts
Transmitter frequency (RF only) 433.92 MHz N/A
Transmitter range (RF only) 30 meters max. N/A
Rated Impulse Voltage N/A 2.5Kv
Dimensions (mm) 138 wide x 88 high x 28 deep
Ball Pressure Test 75°C
Temperature Range 5-30°C
Design Standard EN 60730-2-7 (EN300220 for RF)
Control Pollution Situation Degree 2
Time accuracy ± 1 min.
Temperature accuracy ±1°C
*1: Unit must powered up for 6 days to charge cell before full back-up is available
Please Note:
This product should only be installed by a
qualifi ed electrician or competent heating
installer and should be in accordance with the
current edition of the IEEE wiring regulations.
To Next Page
Loading...
Need help?
General
